Juki LS-1342-7

Features

• With large vertical-axis hook, gauge for small articles, and automatic thread trimmer
• The machine is equipped as standard with a mechanism to correct uneven material feed by making-micro adjustments to the bottom-feed
• Compared with the elliptical feed, the rectangular feed helps reduce gathered stitches
• The ratio of alternate vertical movement remains unchanged even when the material thickness changes
• Higher lift of the presser foot
• The maximum alternating vertical movement is 6.5mm
• The vertical stroke of the walking foot and presser foot can be easily set and changed
• Excellent operability and maintainability
• The underside of the top end of the cylinder-bed is provided with an easy-to-remove cover. This promises easy cleaning of thread wastes
• The stitch length can be easily selected by the stitch dial
• The machine's enhanced operability features include a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel(160mm)
• A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup
• The machine's full-open-type top design makes adjusting works easier
• The machine comes with a lubricating mechanism that uses a centralized oil wick
• This substantially reduces the time and trouble required for oiling the machine. (The hook needs manual oiling with an oiler)
• A walking foot mechanism is built into the machine arm to prevent oil from scattering
• Complete with table stand and motor